Alaabta
Dareemaha warshadaha 4 lakab adag& pcb dabacsan oo leh 2oz naxaas ah
| Lakabyo | 4 lakab oo adag+2 lakab oo dabacsan |
| Dhumucda looxa | 1.60MM+0.2mm |
| Qalab | FR4 tg150+Polymide |
| Dhumucda naxaasta | 1 OZ (35um) |
| Dhamaystir dusha sare | ENIG Au Dhumucda 1um;Ni Dhumucda 3um |
| Daloosha Min (mm) | 0.21mm |
| Balaadhka khadka ugu yar (mm) | 0.15mm |
| Meesha khadka ugu yar (mm) | 0.15mm |
| Maaskarada Alxanka | Cagaaran |
| Midabka Halyeyga | Caddaan |
| farsamaynta makaanikada | V-dhibcaha, CNC Milling (dariiqa) |
| Baakad | Boorsada lidka ku ah |
| Imtixaanka E-tijaabada | Baadhitaanka duulaya ama Fixture |
| Heerka aqbalaadda | IPC-A-600H Fasalka 2 |
| Codsiga | Elektrooniga baabuurta |
Hordhac
Kumbuyuutarrada qallafsan & qallafsan ayaa lagu daraa looxyo adag si loo abuuro badeecadan isku-dhafan.Qaar ka mid ah lakabyada habka wax soo saarka waxaa ka mid ah wareeg dabacsan oo dhex mara looxyada adag, oo u eg
naqshad wareeg ah oo adag oo adag.
Naqshadeeyaha guddiga ayaa ku dari doona godadka godadka (PTHs) ee isku xira wareegyada adag iyo kuwa dabacsan taas oo qayb ka ah habkan.PCB-gan waxa uu caan ku ahaa caqligiisa, saxnaantiisa, iyo dabacsanaantiisa awgeed.
PCB-yada adag-Flex waxay fududeeyaan naqshada elegtarooniga ah iyagoo meesha ka saaraya fiilooyinka dabacsan, xidhiidhada, iyo fiilooyinka gaarka ah.Wareegga looxa adag&Flex wuxuu si aad ah ugu dhex milmay dhismaha guud ee guddiga, kaasoo wanaajinaya waxqabadka korantada.
Injineerada ayaa filan kara dayactirka iyo waxqabadka korantada si aad uga wanaagsan taas oo ay ugu wacan tahay isku xirka korantada iyo farsamada ee PCB-ga adag.
Qalab
Qalabka Substrate-ka
Walaxda ugu caansan ee adag-ex waa fiberglass tolsan.Lakab qaro weyn oo resin epoxy ah ayaa jaakado ka sameysan fiberglasskan.
Si kastaba ha ahaatee, muraayadaha epoxy-impregnated fiberglass lama hubo.Uma adkeysan karto shoog kedis ah oo joogto ah.
Polyimide
Qalabkan waxaa lagu doortaa dabacsanaantiisa.Waa mid adag oo u adkeysan karta naxdinta iyo dhaqdhaqaaqyada.
Polyimide sidoo kale waxay u adkeysan kartaa kulaylka.Tani waxay ka dhigaysaa mid ku habboon codsiyada leh isbeddellada heerkulka.
Polyester (PET)
PET waxaa lagu door bidaa sifadeeda korantada iyo dabacsanaanta.Waxay ka hortagtaa kiimikooyinka iyo qoyaanka.Sidaas awgeed waxaa laga yaabaa in lagu shaqeeyo xaaladaha adag ee warshadaha.
Isticmaalka substrate ku habboon waxay hubisaa xoogga la rabo iyo cimri dhererka.Waxay tixgelisaa walxaha sida caabbinta heerkulka iyo xasilloonida cabbirka marka la dooranayo substrate.
Xabagta Polyimide
Dhererka heerkulka xabagta ayaa ka dhigaysa mid ku habboon shaqada.Waxay u adkeysan kartaa 500 ° C.Iska caabin kuleylkeeda sare ayaa ka dhigaysa mid ku habboon codsiyada muhiimka ah ee kala duwan.
Xabagta Polyester-ka
Xabagtani waxay ka qiimo badan yihiin xabagta polyimide.
Waxay aad ugu fiican yihiin samaynta wareegyada ilaalinta adag ee aasaasiga ah.
Xidhiidhkoodu sidoo kale waa daciif.Xabagta polyester-ka sidoo kale ma aha mid u adkaysata kulaylka.Dhawaan ayaa la cusbooneysiiyay.Tani waxay ku siinaysaa caabbinta kulaylka.Isbeddelkani wuxuu sidoo kale kor u qaadaa la qabsiga.Tani waxay ka dhigaysaa inay ku badbaadaan isku dhafka PCB-ga badan.
Xabagta akril
Xabagyadani way ka sarreeyaan.Waxay leeyihiin xasilooni kulayleed heer sare ah oo ka dhan ah daxalka iyo kiimikooyinka.Way fududahay in la codsado oo yara jaban.Marka lagu daro helitaankooda, waxay caan ku yihiin soosaarayaasha.soo saarayaasha.
Kacsi
Tani waxay u badan tahay inay tahay xabagta ugu ballaadhan ee loo isticmaalo samaynta wareegyada qallafsan.Waxay sidoo kale u adkeysan karaan daxalka iyo heerkulka sare iyo hoose.
Sido kale aad ayey ula qabsan karaan oo u xasilan yihiin.Waxa ku jira wax yar oo polyester ah oo ka dhigaya mid dabacsan.
Isku-duubni
Isku dhafka PCB-ga adag waa mid ka mid ah qaybaha ugu badan inta lagu jiro
been abuurka PCB-ga adag oo aad uga dhib badan heerka caadiga ah
looxyada adag, aynu eegno 4 lakab oo PCB-ga adag sida hoos ku qoran:
Maaskarada alxanka sare
Lakabka sare
Dielectric 1
Lakabka ishaarada 1
Dielectric 3
Lakabka ishaarada 2
Dielectric 2
Lakabka hoose
Maaskarada hoose ee alxanka
Awoodda PCB
| Awoodda guddiga adag | |
| Tirada lakabyada: | 1-42 lakab |
| Qalab: | FR4 \ sare TG FR4 \ Walaxda xorta ah ee hogaanka \ CEM1 \ CEM3 \ Aluminum \ Metal core \ PTFE \ Rogers |
| Lakabka ka baxsan Cu dhumucda: | 1-6OZ |
| Lakabka gudaha Cu dhumucda: | 1-4OZ |
| Aagga habaynta ugu badan: | 610*1100mm |
| Dhumucda looxa ugu yar: | 2 lakab 0.3mm (12mil) 4 lakab 0.4mm (16mil) 6 lakab 0.8mm (32mil) 8 lakab 1.0mm (40mil) 10 lakab 1.1mm (44mil) 12 lakab 1.3mm (52mil) 14 lakab 1.5mm (59mil) 16 lakab 1.6mm (63mil) |
| Balladhka Ugu Yar: | 0.076mm (3mil) |
| Meesha ugu Yar: | 0.076mm (3mil) |
| Cabbirka daloolka ugu yar (daloolka u dambeeya): | 0.2mm |
| Saamiga dhinaca: | 10:1 |
| Cabbirka daloolka qodista: | 0.2-0.65mm |
| Dulqaadka qodista: | +\-0.05mm(2mil) |
| Dulqaadka PTH: | Φ0.2-1.6mm +\-0.075mm (3mil) Φ1.6-6.3mm+\-0.1mm(4mil) |
| Dulqaadka NPTH: | Φ0.2-1.6mm +\-0.05mm(2mil) Φ1.6-6.3mm+\-0.05mm(2mil) |
| Dhamaystir dulqaadka guddiga: | Dhumucda |
| 0.8mm≤ Dhumuc≤6.5mm, Dulqaad+/- 10% | |
| Buundada maaskarada ugu yar: | 0.076mm (3mil) |
| Maroojin iyo foorarsi: | ≤0.75% Min0.5% |
| Magaca TG: | 130-215 ℃ |
| Dulqaadashada: | +/- 10%, ugu yaraan+/- 5% |
| Daaweynta Dusha sare: | HASL, LF HASL |
| Dahab Immersion, Dahab Fiish ah, Far Dahab ah | |
| Immersion Silver, Immersion Tin,OSP | |
| Dahaar Dahab ah oo Xul ah, Dhumucdiisuna tahay Dahab ilaa 3um (120u”) | |
| Daabacaadda Kaarboon, S/M la diiri karo, ENEPIG | |
| Awoodda guddiga aluminium | |
| Tirada lakabyada: | Lakab keli ah, laba lakab |
| Cabbirka sabuuradda ugu badan: | 1500*600mm |
| Dhumucda looxa | 0.5-3.0mm |
| Dhumucda naxaasta: | 0.5-4oz |
| Cabbirka daloolka ugu yar: | 0.8mm |
| Ballaca ugu yar: | 0.1mm |
| Meesha ugu yar: | 0.12mm |
| Cabbirka suufka ugu yar: | 10 micron |
| Dhamaystirka dusha sare: | HASL,OSP,ENIG |
| Qaabaynta: | CNC, Feedh, V-goyn |
| Qalabka: | Tijaabada Caalamiga ah |
| Tijaabaha Duulaya Fur/Gaaban | |
| Microscope awood sare leh | |
| Qalabka Tijaabada Alxanka | |
| Tijaabada xoogga diirka | |
| Fure Volt Sare & Tijaabiye Gaaban | |
| Qalabaynta Qaybta Iskutallaabta oo leh Polisher | |
| Awoodda FPC | |
| Lakabyo: | 1-8 lakab |
| Dhumucda looxa | 0.05-0.5mm |
| Dhumucda naxaasta: | 0.5-3OZ |
| Balladhka Ugu Yar: | 0.075mm |
| Meesha ugu yar: | 0.075mm |
| Cabirka daloolka dhexdiisa: | 0.2mm |
| Cabbirka daloolka laser ugu yar: | 0.075mm |
| Cabbirka daloolka feerka ugu yar: | 0.5mm |
| Dulqaadashada Maaskarada Soldermask: | +\-0.5mm |
| Dulqaadka cabbirka dariiqa ugu yar: | +\-0.5mm |
| Dhamaystirka dusha sare: | HASL,LF HASL, Qalin Immersion, Dahab Immersion, Dahab Flash, OSP |
| Qaabaynta: | Feer, Laser, Jar |
| Qalabka: | Tijaabada Caalamiga ah |
| Tijaabaha Duulaya Fur/Gaaban | |
| Microscope awood sare leh | |
| Qalabka Tijaabada Alxanka | |
| Tijaabada xoogga diirka | |
| Fure Volt Sare & Tijaabiye Gaaban | |
| Qalabaynta Qaybta Iskutallaabta oo leh Polisher | |
| Awood adag & dabacsanaan | |
| Lakabyo: | 1-28 lakab |
| Nooca walxaha: | FR-4 (Tg Sare, Halogen Bilaash ah, Soo noqnoqoshada Sare) PTFE, BT, Getek, Saldhig Aluminium, Saldhig Copper, KB, Nanya, Shengyi, ITEQ, ILM, Isola, Nelco, Rogers, Arlon |
| Dhumucda looxa | 6-240mil/0.15-6.0mm |
| Dhumucda naxaasta: | 210um (6oz) lakabka gudaha 210um (6oz) lakabka sare |
| Cabbirka daloolinta ugu yar: | 0.2mm/0.08" |
| Saamiga dhinaca: | 2:1 |
| Cabbirka guddida ugu badan: | Single dhinac ama laba dhinac: 500mm * 1200mm |
| Lakabyo badan: 508mm x 610mm (20 ″ X 24 ″) | |
| Balaadhka khadka ugu yar: | 0.076mm / 0.076mm (0.003″ / 0.003″)/ 3mil/3mil |
| Iyada oo loo marayo nooca daloolka: | Indho la'aan / la aasay / ku xidhan (VOP, VIP…) |
| HDI / Microvia: | HAA |
| Dhamaystirka dusha sare: | HASL, LF HASL |
| Dahab Immersion, Dahab Fiish ah, Far Dahab ah | |
| Immersion Silver, Immersion Tin,OSP | |
| Dahaar Dahab ah oo Xul ah, Dhumucdiisuna tahay Dahab ilaa 3um (120u”) | |
| Daabacaadda Kaarboon, S/M la diiri karo, ENEPIG | |
| Qaabaynta: | CNC, Feedh, V-goyn |
| Qalabka: | Tijaabada Caalamiga ah |
| Tijaabaha Duulaya Fur/Gaaban | |
| Microscope awood sare leh | |
| Qalabka Tijaabada Alxanka | |
| Tijaabada xoogga diirka | |
| Fure Volt Sare & Tijaabiye Gaaban | |
| Qalabaynta Qaybta Iskutallaabta oo leh Polisher | |
